Original message
| austinallen
 |  "Six Sigma Black Belt Opportunities"
, Tue 31 Oct 15:49 
We are a nationally recognized Recruiting Firm that has been retained by a large international corporation to assist them in developing talent for their Six Sigma Programs. We are presently seeking Certified Six Sigma Black Belts and Master Black Belts in various locations throughout the United States.
We would appreciate you reviewing the information below and if you know of someone who might have an interest in any of these opportunities, please forward this outline to them. Your assistance is greatly appreciated.
POSITIONS:
Six Sigma Black Belts and Master Black Belts
Positions presently available in: CA, IN, OK, TX (Future positions to be available in other locations)
Salary range: $70,000 - $95,000, plus Excellent Perks and Programs.
Premier International manufacturer seeks Certified Six Sigma Black Belt and Master Black Belt professionals who can lead in the implementation of Six Sigma programs.
Will be totally responsible for large capital projects and improvements amounting to Millions of dollars. Excellent opportunity to get on the fast tract for upward mobility in a growing operation. Will also be mentoring to groups of Green Belts.
Requirements:
1. Bachelors Degree
2. Six Sigma Black Belt Certification.
3. 2 or more years experience in a manufacturing environment. (Manufacturing experience is mandatory.)
All Interview, relocation & fee expenses paid by companies. Excellent compensation packages, benefits, perks and generous relocation packages.
HERE ARE SOME HELPFUL HINTS……
1. Please e-mail resume & cover letter to: jobs@austinallen.com
2. Those who include Salary & Location Preferences when applying are considered first.
We will be in contact with you if we determine that your qualifications are of interest to our clients or if we have other positions that we think would interest you.
Thank You,
Martha Woodham
Technical Recruiter
AUSTIN ALLEN COMPANY
Cordova, TN 38018
901-756-0900
|
|
Replies:
|
| dbandur
| "Re(1):Six Sigma Black Belt Opportunities" , Tue 6 Feb 13:49
DRAGOS BANDUR
58 WEXFORD BLVD.
TORONTO, ONTARIO M1R 1L3
(416) 751 1418
E- mail: dbandur@idirect.com
Summary
A bilingual, certified Six Sigma Black Belt with over fourteen years experience in Quality Engineering in three different industries, including ten years of Nuclear Fuel Lab supervision as Physicist and Scientist.
Working knowledge of data- based tools: EDA, Non- linear Estimation, DOE, Gage R&R, advanced quality tools: FMEA, PPAP, APQP, MSA, Corrective Actions and SPC. Familiar with knowledge- based tools: Prioritization and CS Matrix etc. CQE trained, hands- on knowledge in Industrial Statistics theory, implementation, and training. Certified by American Management Association in Leadership Skills. Broad scientific background including Advanced Calculus, Thermodynamics, Optics, Mechanics etc. Proficient with MS Office, Statistica, Minitab, Cadkey and AquA3.Self-starter, team player, creative, confident;
Accomplishments
BOMBARDIER AEROSPACE- DEHAVILLAND, Toronto, Ontario 1999-2001
Six Sigma Agent- Change Management
Generated over $2 M savings in one year through Six Sigma projects.
Guided cross- functional teams through DMAIC phases toward improving the process yield, and part quality.
Researched manpower and resources engaged in unplanned work and manufacturing of spare parts.
Facilitated the start- up of new shop, designed for handling spare parts and short orders, and generating $ 7M cost of sales per year with 5-headcount reductions.
Collaborated with Structural Design teams in improving design practices.
Consolidated newly- designed Cost Estimation Tool with regression models drawn from historical data.
TORONTO PLASTICS LTD., Toronto, Ontario 1996- 1999
Quality Engineer
Solved issues regarding:
-Injection molding process window,
-Process capability and state of control,
-Unbalances in multi- cavity tools,
-Measurement systems analysis
Designed inspection fixtures and gauges.
Maintained professional contact with Customers during process qualification.
Developed Part Qualification Package including FMEA, Control Plan, Gage R&R and Capability Study.
Edited and updated Quality Procedures and Instructions.
Supported Company's quality effort by:
-Proposing and conducting research study on original welding technique of plastic parts;
-Recommending and implementing new statistical and data collection software;
-Providing training in statistical techniques for Technicians, Supervisors and Junior Quality Analysts;
CANDU NUCLEAR FUEL PLANT, PITESTI, ROMANIA 1988 - 1994
Scientist
Implemented Beta Backscattering Method for Thin Coating Thickness measurement,
Translated Canadian standards and protocols,
Collaborated in research studies and published in national symposiums including:
-Study of Superficial Properties of Iron Based Ceramics. Constanta, Romania, 1988
-Changes in Iron Oxides Texture due to the Alkaline Promoting in Fischer- Trophsch Synthesis. Oradea, Romania, 1989
CANDU NUCLEAR FUEL PLANT, Pitesti, Romania 1984 - 1988
Physicist
Conducted the Physical Properties Laboratory in Quality Control Department
Analyzed and qualified Control Methods including:
-Helium Leak by Mass Spectrometry;
-Ultrasonic Flaw Detection;
-Thin Coating Thickness Stylus Analysis
-Specific Surface Area and Pore Volume Analysis by BET Adsorption;
-Particle Size Analysis by Coulter Counter.
Conducted on the job training for Technicians,
Edited Operator's Training Manual including topics on descriptive statistics, physical properties of powders and thin coating thickness measurement.
Education
UNIVERSITY OF BUCHAREST, ROMANIA 1982
License Diploma in Physics
Training
2000 SIX SIGMA AGENT CERTIFICATION PROGRAM
Six Sigma Academy, Toronto, ON
2000 INTRODUCTION TO LEADERSHIP
American Management Association, Toronto, ON
1999 CQE REFRESHER COURSE
Forward Management Services, Toronto, ON
1999 INTRODUCTION TO LAN ADMINISTRATION
DeVry Institute of Technology, Toronto, ON
1998 DESIGNED EXPERIMENTS
University of Toronto, Continuing Engineering Education Program, Toronto, ON
1997 CMS QUERY/ 400
CMS Manufacturing Systems, Markham, ON
1996 GEOMETRICAL DIMENSIONING AND TOLERANCING
Quality Management Services, Brantford. ON
1996 PRODUCTION PART APPROVAL PROCESS (PPAP)
Canadian Supplier Institute, Mississauga, ON
1995 DESKTOP APPLICATIONS
Prime Tech Institute, Downsview, ON
1989 MANUFACTURING AND QUALITY CONTROL OF CANDU FUEL BUNDLE
Nuclear Energy Committee, Romania.
Professional Membership
THE AMERICAN SOCIETY FOR QUALITY, since 1996.
THE INTERNATIONAL SOCIETY FOR SIX SIGMA PROFESSIONALS, since 2000
|
| | anonymous
| "Re(2):Six Sigma Black Belt Opportunities" , Fri 30 Mar 11:12
DRAGOS BANDUR
58 Wexford Boulevard
Toronto, Ontario, M1R 1L3
(416) 751-1418
dbandur@idirect.com
SUMMARY
A bilingual certified Six Sigma Black Belt with extensive quality engineering experience in aerospace, plastics and nuclear industries, seeking a progressive position where experience and skills help improve process yield and product quality. Working knowledge of ISO/QS 9000, industrial statistics and problem solving tools, including:
Knowledge-based:Prioritization and CS Matrix, NGT, C&E Diagram
Data-based: EDA, Non-Linear Estimation, DOE, Learning Curve
Advanced Quality:APQP (FMEA, PPAP), MSA, Corrective Actions, SPC
Scientific background including Optics, (Quantum) Mechanics, (Thermo) Dynamics and Advanced Calculus. Skilled trainer, team player, creative and goal- oriented. Computer literacy: MS Office, Statistica, Minitab, Cadkey, Aqua3, and Digital Photography. Certified by AMA in leadership skills.
EXPERIENCE
BOMBARDIER AEROSPACE, Toronto, Ontario 1999 – 2001
Six Sigma Agent, Change Management
* Generated $2M+ savings in one year through four Six Sigma projects (DMAIC).
* Guided cross-functional teams through DMAIC phases to improve yield and quality.
* Started $7M/ yr. cost of sales spare parts shop with 5-headcount reduction.
* Built multiple regression models to reduce the cycle time of cost analysis by 70%.
TORONTO PLASTICS LTD., Toronto, Ontario 1996 – 1999
Quality Engineer
* Gained exposure to automotive, business machines and medical equipment industries.
* Solved issues regarding process window to improve capability and control.
* Designed inspection fixtures and gauges using statistical tolerancing to reduce inspection by measurement.
* Maintained professional contact with customers and suppliers to improve quality and flow rate.
* Supported company's quality effort by:
- Recommending STATISTICA® for data collection and analysis to replace the old software.
- Training supervisors and quality analysts in statistical techniques to upgrade inspection skills.
CANDU NUCLEAR FUEL PLANT, Pitesti, Romania 1984 – 1994
Scientist, 1988 - 1994
* Conducted the Physical Properties Laboratory in Quality Department.
* Implemented BBS technique to improve the quality of thin coating thickness measurement.
* Collaborated in research studies and published in national symposiums.
Physicist, 1984 - 1988
* Conducted the Physical Properties Laboratory in Quality Department and maintained safety procedures.
* Analyzed and qualified control methods including:
- Specific surface area and pore volume analysis by BET adsorption
- Particle size analysis by Coulter counter.
* Trained technicians to develop skills and improve the understanding of inspection techniques
* Edited Operator's Training Manual on descriptive statistics of powder particles.
MINISTRY OF EDUCATION, Romania, 1982- 1984
High School Teacher
Mathematics, Physics, Chemistry
EDUCATION
License Diploma in Physics, University of Bucharest, Romania, 1982
PROFESSIONAL MEMBERSHIPS
The American Society for Quality, 1996 - Present
The International Society for Six Sigma Professionals, 2000 - Present
|
|
|
